Canon EOS R3 Mirrorless Camera with RF 24-70mm f/2.8L IS USM Lens

• Canon EOS R3 Mirrorless Camera
• Canon LP-E19 Battery Pack (2700mAh)
• Canon LC-E19 Battery Charger
• Canon ER-L1 Camera Strap
• Canon ER-h Eyecup
• Canon R-F-5 Camera Cover
• Canon IFC-100U Interface Cable (39.4")
• Accessory Shoe Cover
• Battery Pack Cover
• Power Cord
• IFC Cable IFC-100U Protector
• Import Model, 30 Day Labor 1 Yr Parts Warranty by Seller 

• Canon RF 24-70mm f/2.8 L IS USM Lens
• Canon E-82 II 82mm Lens Cap
• Canon Lens Dust Cap RF
• Canon EW-88E Lens Hood
• Canon Lens Case LP1222
• Import Model, 30 Day Labor 1 Yr Parts Warranty by Seller 

• BRAND NEW IN STOCK & READY TO SHIP!!!
• 24MP Full-Frame Stacked BSI CMOS Sensor
• Dual Pixel CMOS AF II, Eye Control AF
• 6K60 Raw and 4K120 10-Bit Internal Video
• 30 fps E. Shutter, 12 fps Mech. Shutter
• 5.76m-Dot EVF with 120 fps Refresh Rate
• 3.2" 4.2m-Dot Vari-Angle Touchscreen LCD
• Sensor-Shift 5-Axis Image Stabilization
• Multi-Function Shoe, Built-In Vert. Grip
• CFexpress & SD UHS-II Memory Card Slots
• Wired LAN and 5 GHz Wi-Fi Support
• Import Model, 30 Day Labor 1yr Parts Warranty by Seller

Built for speed, versatility, and reliability, the Canon EOS R3 combines the technology from their mirrorless EOS R system with the robustness and performance you'd expect from a flagship DSLR. Revolving around a new full-frame stacked sensor, updated AF performance, and refined body design, the EOS R3 is the first 3-Series camera since the film era and plants itself as a fast-shooting, flexible, and contemporary mirrorless camera.

Among the most significant technologies in the R3 is the 24.1MP stacked sensor which affords truly fast readout speeds to help reduce rolling shutter distortion and benefit fast continuous shooting and video recording applications. This full-frame BSI CMOS sensor is also benefitted by an updated DIGIC X processor, which helps boost the overall speed for up to 30 fps continuous shooting with an electronic shutter, 6K 60p raw and 4K 120p video recording, and intelligent Dual Pixel CMOS II autofocus with Eye Control AF for intuitive focus point selection.

The R3 is also the first EOS R-series camera to feature a built-in vertical grip, making it an ergonomic choice for long shooting times and for seamlessly switching between horizontal and vertical shooting orientations. The rugged body design also incorporates a high-resolution 5.76m-dot OLED EVF and a 3.2" vari-angle touchscreen LCD, along with dual memory card slots, wireless and wired connectivity, and an updated Multi-Function Shoe design for expanded accessory compatibility.

Full-Frame Stacked Sensor and DIGIC X Processor
24.1MP BSI Stacked CMOS Sensor
A first for EOS cameras, the R3 features a stacked sensor design that promotes impressively fast read-out speeds that greatly reduce rolling shutter distortion and enables faster shooting performance. This 24.1MP full-frame CMOS chip also has a back-illuminated design that is more efficient at gathering light, which leads to reduced noise, higher clarity, and smoother color rendering, particularly when working in low-light conditions.
DIGIC X Processor
An updated DIGIC X complements the new sensor design with capable processing and the ability to perform simultaneous high-speed tasks, such as 30 fps high-speed shooting while performing AF and AE readings before each frame. The processor also helps to realize a broad sensitivity range from ISO 100-102400, which is expandable to ISO 50-204800, for working in a broad variety of lighting conditions.
Electronic Shutter
A main benefit of the stacked sensor design is a highly usable electronic shutter function that is able to shooting continuously at up to 30 fps, for up to 150 raw frames, with virtually no rolling shutter distortion. When working in manual or shutter-priority modes, the top shutter speed is 1/64,000 sec and flash sync is even possible with an electronic shutter, up to 1/180 sec. This versatile shutter function is inherently silent, but can be paired with a choice of audible shutter noises to go along with each shutter click to make it easier for subjects to recognize when a photo has been taken.

Poised to be the new workhorse zoom, the Canon RF 24-70mm f/2.8L IS USM is a versatile wide-angle to portrait-length lens characterized by its bright, advanced, and intuitive design. The constant f/2.8 maximum aperture suits working in difficult lighting conditions and also enables greater control over depth of field. The optical design incorporates a series of aspherical and Ultra-Low Dispersion elements, which greatly reduce a variety of aberrations throughout the zoom range in order to produce sharp and clear imagery. An Air Sphere Coating has also been applied to suppress flare and ghosting when working in strong lighting conditions.

Balancing the distinguished optical assets is the Nano USM focus system, which delivers fast, nearly silent autofocus performance with full-time manual focus override. An Image Stabilizer also compensates for up to five stops of camera shake to help produce sharper handheld shots in difficult lighting conditions. A unique Control Ring is also integrated into the lens design for intuitive control over exposure settings from the lens itself. Additionally, this 24-70mm is weather-sealed and has a fluorine coating to protect the front and rear elements.

Standard wide-angle to telephoto zoom lens is designed for use with full-frame Canon RF-mount mirrorless cameras.
Bright f/2.8 constant maximum aperture maintains consistent illumination throughout the zoom range and suits working in low-light conditions as well as affords increased control over depth of field for working with selective focus techniques.
Three UD (Ultra-Low Dispersion) elements help to minimize chromatic aberrations and color fringing in order to provide greater clarity and color accuracy.
Three aspherical elements are used to correct spherical aberrations and distortion for improved sharpness and accurate rendering.
An Air Sphere Coating (ASC) has been applied to lens elements to reduce backlit flaring and ghosting for maintained light transmission and high contrast in strong lighting conditions.
An Optical Image Stabilizer helps to minimize the appearance of camera shake by five stops to better enable working in low-light conditions and with slower shutter speeds.
Nano USM system utilizes both a ring type USM and an STM mechanism to realize quick and accurate focusing that is also smooth and nearly silent to suit both photography and video applications. This focusing system also affords full-time manual focus control when working in the one-shot AF mode.
Configurable Control Ring can be used to adjust a variety of exposure settings, including aperture, ISO, and exposure compensation.
Protective fluorine coating has been applied to the front and rear element to resist fingerprints and smudges and to make cleaning these elements significantly easier.
As a member of the esteemed L-series, this lens has a weather-resistant design that protects against dust and moisture to enable its use in inclement conditions.
Rounded nine-blade diaphragm contributes to a pleasing bokeh quality.

Imaging

Exposure Control

Still Image Capture

Internal Video Capture

External Video Capture

Interface

Monitor

Viewfinder

Focus

Flash

Environmental

General

Packaging Info